Furniture. Friday , December 29th , 2017 - 16:09:09 PM
Wood veneers can be difficult to match. It is possible to buy new veneer strips, but they are generally thinner than the old hand-sawn veneers and do not always match in colour. It often pays to go to an auction to look for a broken oddment of furniture that has suitable veneers. To remove a veneer from its backing, first clean off any old polish with white spirit and carefully clean the varnish or wax. Place a damp cloth over the cleaned strip and press with a fairly hot iron. Keep the cloth damp. This melts the Scotch glue holding down the veneer, which can then be peeled off. The same technique is used to raise small areas on the antique piece, but use a soldering iron instead of an iron. Wipe all traces of glue while it is still warm. Dampen the veneer and flatten it between two pieces of wood for about 24 hours before use. Do not let it dry completely, for veneers must be re-laid while still damp and pliable. The replacement veneer should be slightly thicker than the existing one, to allow for sanding. Stick the new strip down with Scotch glue and apply a weight or clamp until the glue has completely set. Wax and polish to match the existing finish.
Choosing Industrial Furniture: While choosing industrial furniture keep in mind that the industrial era used materials that were bulky and heavy such as solid wood and steel. These pieces were made to last for years and took alot of wear and tear. You can still find some of these peices today. Their worn, weathered look gives them character and adds a bit of drama to any space. They may be covered in leather, heavy denim, linen, cotton ticking or wool. Besides wood and steel you may find pieces made of galvanized metal and iron with muted industrial paint and powder-coated finishes.
Assured Quality. Quality assurance is a given in custom furniture as you will be aware about the materials and finish used and its perfection can be obtained, as you are in the process but with store bought furniture you buy a readymade furniture but are not into the whole process.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Night claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.