Evangeline Espinoza. Furniture. June 05th , 2017.
Wood veneers can be difficult to match. It is possible to buy new veneer strips, but they are generally thinner than the old hand-sawn veneers and do not always match in colour. It often pays to go to an auction to look for a broken oddment of furniture that has suitable veneers. To remove a veneer from its backing, first clean off any old polish with white spirit and carefully clean the varnish or wax. Place a damp cloth over the cleaned strip and press with a fairly hot iron. Keep the cloth damp. This melts the Scotch glue holding down the veneer, which can then be peeled off. The same technique is used to raise small areas on the antique piece, but use a soldering iron instead of an iron. Wipe all traces of glue while it is still warm. Dampen the veneer and flatten it between two pieces of wood for about 24 hours before use. Do not let it dry completely, for veneers must be re-laid while still damp and pliable. The replacement veneer should be slightly thicker than the existing one, to allow for sanding. Stick the new strip down with Scotch glue and apply a weight or clamp until the glue has completely set. Wax and polish to match the existing finish.
In fact, rather than harm the environment, rattan can be considered to benefit it, insofar as it is used as a replacement for wood wicker in many furniture items. This, in turn, helps preserve forests, as it reduces the need to source wood from trees, preventing deforestation and logging. Furthermore, this plant is often grown in floodplains, thereby facilitating the appearance of animal populations in said areas and making use of soil which would, otherwise, go unused. Finally, rattan harvesting and sourcing helps provide jobs for inhabitants of the areas of the world the material is commonly found at, thus helping maintain a sustainable economy.
Although storage facilities are much better than garage storage and also have provisions for boat storage, one needs to be careful while packing things for storage. For instance, a cloth or a towel can be placed over the contents of each drawer to prevent dust from entering the furniture. Wrap the light bulbs and shades from lamps, in towels or newspapers. Computers and electronic items can be stored in their original boxes. All the accessories like cords, modems, speakers, and microphones should be stored together so that they do not get lost.
The same hot iron and gluing method is used in repairing marquetry. Lay a piece of paper over the missing section and rub with a soft pencil to get an outline of the area. Cut the paper to the pattern and stick it to the replacement piece of wood. Cut the wood slightly larger than the pattern and rub down with glass-paper until the exact fit can be obtained. Stick it into place with cold wood glue. On many antique furniture pieces the marquetry tends to lift through age and using the warm iron technique will heat the glue and the raised piece can be gently pressed down back into position. If dust has been trapped under the lifted section, it should be removed, cleaned and re-stuck into position.
In today's market place you can find a plethora of reproduced chairs, desks, tables, storage units, lighting, and accessories inspired by the industrial era, but if you truly want an industrial look, try searching for original items that can be found in salvage yards, flea markets and junk shops, and re-purpose them, or use them as is to add a bit of character and drama to a space. Many of today's manufacturers are designing pieces that really bring back the industrial era and while some of these items are pricey, they are great for adding historical character in today's spaces.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Night claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.