Marissa Booker. Furniture. June 02nd , 2017.
Wood veneers can be difficult to match. It is possible to buy new veneer strips, but they are generally thinner than the old hand-sawn veneers and do not always match in colour. It often pays to go to an auction to look for a broken oddment of furniture that has suitable veneers. To remove a veneer from its backing, first clean off any old polish with white spirit and carefully clean the varnish or wax. Place a damp cloth over the cleaned strip and press with a fairly hot iron. Keep the cloth damp. This melts the Scotch glue holding down the veneer, which can then be peeled off. The same technique is used to raise small areas on the antique piece, but use a soldering iron instead of an iron. Wipe all traces of glue while it is still warm. Dampen the veneer and flatten it between two pieces of wood for about 24 hours before use. Do not let it dry completely, for veneers must be re-laid while still damp and pliable. The replacement veneer should be slightly thicker than the existing one, to allow for sanding. Stick the new strip down with Scotch glue and apply a weight or clamp until the glue has completely set. Wax and polish to match the existing finish.
Assured Quality. Quality assurance is a given in custom furniture as you will be aware about the materials and finish used and its perfection can be obtained, as you are in the process but with store bought furniture you buy a readymade furniture but are not into the whole process.
Many industrial furniture designs today have been greatly influenced by the industrial workplaces of yesterday. Items once produced for factories, hospitals, schools, and commercial units are now being reproduced for our living rooms, dining rooms, kitchens, and even our bedrooms. They also work great in office's and can add a lot of style to commercial settings. Many bars, restaurants, and even rental venues are using an industrial style to draw customers into a bygone era.
Packing: Good packing can ensure that the furniture will be as beautiful as it was when it was stored. As a first step, you can disassemble beds and tables before storing. You can apply a coat of wax to protect its sheen. All the screws, bolts, and nuts should be placed in a clear plastic bag and tied to the bed frame. A quilt can be wrapped around tabletops and headboards to prevent denting and scratching.
The good news is, as far as naturally sourced materials are concerned, rattan is one of the safest from an environmental standpoint. While the palm tree the material is derived from is geographically limited in location, rattan itself is easily renewable, and the impact its sourcing has in the environment can be considered negligible.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Night claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.