Furniture. Thursday , October 05th , 2017 - 16:43:34 PM
The same hot iron and gluing method is used in repairing marquetry. Lay a piece of paper over the missing section and rub with a soft pencil to get an outline of the area. Cut the paper to the pattern and stick it to the replacement piece of wood. Cut the wood slightly larger than the pattern and rub down with glass-paper until the exact fit can be obtained. Stick it into place with cold wood glue. On many antique furniture pieces the marquetry tends to lift through age and using the warm iron technique will heat the glue and the raised piece can be gently pressed down back into position. If dust has been trapped under the lifted section, it should be removed, cleaned and re-stuck into position.
A simple way to improve antique pieces of furniture, such as a chest of drawers, is to fit new handles. The Victorians had a habit of replacing metal handles with round wooden knobs, often leaving the marks of the former back-plates showing. Sets of old handles can be picked up cheaply from antique and second-hand shops but make sure that the back-plates are large enough to cover any existing indentations.
Of these, resin-based synthetic rattan is of course the most popular, as well as the most widespread across public consciousness; however, unlike what many home-owners might think, not every rattan garden furniture item is made of the same type of synthetic polymer. Much to the contrary, rattan items on the market can be made out of any one of four types of resin: polyethylene, polypropylene, PVC or nylon.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Night claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.